495BP10
495BP10
Spectral Curves
The spectral curve and ascii data is a typical representation of this filter’s performance, but will vary due to production and design variations. Omega only guarantees this part to meet the product specifications listed. The displayed OD is calculated from a %T measurement. The blocking regions are likely higher OD than what is displayed here. To learn more about the challenges of measuring high OD values, see our paper.
Download Data
Detailed Specifications
| Center Wavelength (nm) |
495.00
|
| Center Wavelength Tolerance (nm) |
+2/-2
|
| FWHM Bandwidth (nm) |
10.00
|
| FWHM Bandwidth Tolerance (nm) |
+2/-2
|
| Transmission |
≤ 1% variation in peak %T measured at center of filter and at 4 locations 90 degrees apart on its perimeter, best effort. ≥ 70% at peak
|
| Blocking |
≥ OD5 avg., out of band, 200 to 1100 nm ≥ OD3, 1100 to 1250 nm
|
| Transmitted Wavefront Distortion |
ns
|
| Angle of Incidence |
0
|
| Minimum Surface Quality |
Assembly per MIL-C-48497A (F scratch/ F Dig)
|
| Coating Type |
Protected Coating
|
| Filter Type |
Bandpass
|
| Filter Application |
Bandpass
|
| Half-cone AOI |
0
|
| Fluorescence Component |
Bandpass
|
| Flatness |
ns
|
| Parallelism |
ns
|
| AR Coating |
none
|