530ALP
530ALP
Spectral Curves
The spectral curve and ascii data is a typical representation of this filter’s performance, but will vary due to production and design variations. Omega only guarantees this part to meet the product specifications listed. The displayed OD is calculated from a %T measurement. The blocking regions are likely higher OD than what is displayed here. To learn more about the challenges of measuring high OD values, see our paper.
Download Data
Detailed Specifications
| Transmission |
≥ 80% avg in passband
|
| Blocking |
≥ OD5 UV-520nm
|
| Transmitted Wavefront Distortion |
λ/4 over 80% of CA
|
| Angle of Incidence |
0
|
| Minimum Surface Quality |
Assembly per MIL-C-48497A (F scratch/ F Dig)
|
| Coating Type |
Protected Coating
|
| Filter Type |
Longpass
|
| Filter Application |
Longpass
|
| Half-cone AOI |
0
|
| Fluorescence Component |
Longpass
|
| Flatness |
ns
|
| Parallelism |
≤ 15 arc seconds
|
| AR Coating |
Semi-hard BBAR
|
| Cut-on Wavelength (nm) |
525.00
|
| Cut-on Wavelength Tolerance |
+5/-0
|